Collecting Supplies for Action Figures: Cases, Stands, Risers and Bags

These are the cases, stands, risers and bags that keep a figure collection safe and easy to look at. The list is grouped by what you are trying to do, and every entry gives the size or pack count from its Amazon listing, because the right choice mostly comes down to measuring first.

As an Amazon Associate I earn from qualifying purchases. The links below are affiliate links, and they cost you nothing extra.

Cases for carded figures

A carded figure is worth protecting twice: the bubble and card can crush, and the card edges ding in a box. These two types cover the common 3.75-inch carded sizes. I use Star Cases and acrylic cases in my own collection.

Protech Star Case (10 Pack)

Vintage Collection Rebel Pilot Mon Calamari In A Protech Star Case

A rigid PVC case made for the standard 6 x 9 inch Star Wars card, from the vintage Kenner era through the modern standard style. It also fits G.I. Joe carded figures of that size.

  • Fits carded items 6 inches wide by 9 inches high; the bubble space is 4.75 x 8.125 x 2.25 inches
  • Virgin rigid PVC, acid free
  • Has a hanging tab, so it can go on a wall or stand on a shelf
  • Will not fit the curved bubbles used on Episode III and Saga 2006 figures
  • Sold as a pack of 10; the figure is not included

Check Price on Amazon

EVORetro Acrylic Protector Case for 3.75 Inch Carded Figures (2 Pack)

Vintage Collection Zam Wesell In An Acrylic Case

A clear acrylic case for 3.75-inch carded figures, sealed shut with foam so there is nothing to assemble. It is listed for Star Wars, Marvel Legends and G.I. Joe cards.

  • 3.0 mm thick acrylic with a thin UV-resistant film layer
  • Measures 23.2 x 15.5 x 4.6 cm (about 9.1 x 6.1 x 1.8 inches)
  • Built with full rails on both sides
  • Sold as a pack of 2

Check Price on Amazon

Display cases for loose figures and minifigures

Loose figures look best behind glass or acrylic, where dust stays off them and you can still see every detail. The first two below are full cabinets for a desk or shelf, and the third is a small single-figure case.

LANSCOERY 5-Tier Acrylic Display Case with LED Light

LANSCOERY 5-Tier Acrylic Display Case With LED Light

A tiered case for small figures, with clear acrylic panels, wood shelves and a front door so you can swap figures in and out.

  • 3 mm clear acrylic panels and roughly 12 mm wood boards
  • USB-A powered top light with white, warm and yellow settings and adjustable brightness
  • Listed for action figures, vinyl figures, blind box figures and building block minifigures
  • Assembly is slot-in panels; the listing says the tools and protective foam come in the box

Check Price on Amazon

DOUBLE 2 C 3-Level Acrylic Display Case for Minifigures

DOUBLE 2 C 3-Level Acrylic Display Case For Minifigures

A smaller acrylic box for minifigures and little action figures, built from three removable sections.

  • Assembled size is about 10 x 6 x 5.4 inches
  • The listing says it holds up to 30 minifigures at once
  • Tongue-and-groove joints, with no special tools needed
  • This listing is for the black version

Check Price on Amazon

EVORETRO Clear Blister Cases for Loose Action Figures (50 Pack)

EVORETRO Clear Blister Cases For Loose Action Figures

Clear single-figure cases for loose vintage Star Wars figures, shipped stacked and ready to use. The listing says they also take other small figures, including G.I. Joe, Super7 and ReAction.

  • Case size is 4.5 x 1.5 x 1.5 inches
  • Made from PET plastic with a scratch-resistant outer layer and a thin UV-resistant film
  • No assembly needed: the cases come stacked and locked into place
  • Each case has a protective film, which you peel off from the edges once the figure is inside
  • Listed for vintage Hasbro, Kenner and other small Star Wars figures
  • Sold by EVORETRO and shipped by Amazon

Check Price on Amazon

Risers and tiers

Risers lift the back row of a shelf so every figure shows. Acrylic ones disappear against the shelf, and I use display risers in my own collection. Check the width against your shelf depth before you order, because the tiers are narrow.

Acrylic Display Risers (2 Sets, 10 Pieces)

Acrylic Display Risers 10 Pieces

Ten clear acrylic risers in five graduated heights, two of each, so you can build layers at different levels on a shelf, counter or cabinet.

  • Five sizes, two of each: 9 x 3.15 x 4.72, 8.2 x 3.15 x 3.9, 7.5 x 3.15 x 3.15, 6.7 x 3.15 x 2.36 and 6 x 3.15 x 1.57 inches (length x width x height)
  • The sizes nest together when they are not in use
  • Comes with 2 black display signs, 1 white marker and clear adhesive dots for labelling
  • No assembly needed; peel the protective film from both sides before use
  • Brand is ROADPLUM

Check Price on Amazon

ihomecooker 3-Step Clear Acrylic Display Riser

ihomecooker 3 Step Clear Acrylic Display Riser

A single clear stepped riser, good for a row of figures that you want to see front to back.

  • Each step is 2 inches high; the riser is 3 inches wide and about 11.8 inches long
  • 4 mm thick acrylic panel
  • Peel the protective film off both sides before use

Check Price on Amazon

ihomecooker 3-Tier Black Acrylic Display Riser

ihomecooker 3-Tier Black Acrylic Display Riser

The same stepped shape as the clear one above, in black.

  • Each tier is 2 inches high; the riser is 3 inches wide and about 12 inches long
  • 4 mm thick acrylic panel
  • Remove the protective film from both sides before use

Check Price on Amazon

WINKINE 4-Tier Acrylic Display Stand Riser

WINKINE 4 Tier Acrylic Display Riser

A taller riser with a fourth step you can remove, so it fits cabinets of different depths.

  • Use it as a 3-tier or 4-tier stand
  • Clear acrylic with polished edges
  • Assembled from panels and two support legs; screws and a hex wrench are included

Check Price on Amazon

Figure stands

A figure stand is a clear base with a small peg that fits the peg hole in a figure’s foot, so a loose figure stays upright on a shelf. I use figure stands in my own collection. Stands come in many shapes and pack sizes, so the button below opens an eBay search for figure stands rather than a single listing.

Protech Clear Action Figure Stand

Check Price on eBay

Wall shelves

If the shelves are full, the wall is the next place to go.

Clear Acrylic Floating Shelves (Set of 4)

Clear Acrylic Floating Shelves Set Of 4

Four clear wall ledges that suit small figures, LEGO sets and boxed collectibles.

  • Each shelf is 15.7 x 5.5 x 1.5 inches
  • Mounting hardware is included; the listing says to drill for a rough wall surface
  • Can also sit on a countertop

Check Price on Amazon

Bags for accessories and loose parts

Vintage figures come with tiny weapons that vanish easily. A sealed bag per figure keeps the pieces together. I use sealer bags for this.

GPI Small Reclosable Zip Bags (100 Pack)

GPI Small Reclosable Zip Bags 100 Pack

Small clear zip bags that suit accessories, spare parts and tiny weapons.

  • Each bag is 2.5 inches wide by 3 inches high below the zipper
  • 2 mil polyethylene with a reclosable zipper top

Check Price on Amazon

Plymor 6 x 9 Inch Zipper Reclosable Bags (Pack of 50)

Plymor 6 x 9 Inch Zipper Reclosable Bags

A larger, heavier zip bag for when the small ones are too small.

  • 6 inches wide by 9 inches high below the zipper
  • 6 mil polyethylene, heavier than the small bags above
  • Pack of 50

Check Price on Amazon

Coins and small cards

Some lines came with coins or small cards. Measure the diameter of yours before you order a capsule or a stand.

Air-Tite 39 mm Black Ring Coin Capsules (25 Pack)

Air Tite 39mm Black Ring Coin Capsules

Round capsules for coins and chips.

  • Inside diameter is 39 mm and the depth is 2.92 mm; the outside diameter is 51.59 mm
  • The rings sit inside the capsule
  • They arrive unassembled between layers of foam
  • Listed for 1 oz silver rounds, copper rounds and standard casino chips

Check Price on Amazon

Boao Mini Acrylic Easel Stands (12 Pack)

Boao Mini Acrylic Easel Stands 12 Pack

Tiny clear easels for standing up a coin, a graded card or a small card on a shelf.

  • Each stand is 2.24 inches tall, with a base of 2.24 x 1.77 inches
  • Triangle base, made of acrylic
  • Pack of 12

Check Price on Amazon

Comics and books

If you collect comics next to your figures, you can hang them on the same wall.

CollectorMount Comic Book Wall Mount and Shelf Stand

CollectorMount Comic Book Wall Mount

An adjustable bracket that works as a floating wall mount or a shelf stand for comics, graded comics and magazines.

  • Fits comics 7.14 to 14.25 inches
  • Supports the top and the bottom of the comic
  • Listed as a 5-pack at the time of writing

Check Price on Amazon

Before you buy

  • Measure first. Check the card or bubble size against the case size in each entry.
  • Check the bubble shape. The Protech Star Case does not fit the curved bubbles on Episode III and Saga 2006 figures.
  • Peel the film. Acrylic risers and cases arrive with a protective film on both sides.
  • Prices and stock change. Some of these listings are sold by third-party sellers, so check the price and seller on Amazon before you order.

Once the figures are safe, the vintage Kenner Star Wars figures checklist is a good place to track what is in each case.